शिप पार्ट्स के लिए ब्लैक ब्लॉक के सीएनसी पार्ट की सेवा के लिए उपलब्ध इंजीनियर्स
Jun 09, 2014
एक संदेश छोड़ें
सामान्यतया, रिक्त की रासायनिक संरचना जितनी सरल होती है, फोर्जिंग के बाद उतनी ही तेजी से शीतलन दर होती है; अन्यथा, धीमा। इसके अनुसार, साधारण कार्बन स्टील और कम-मिश्र धातु इस्पात सिलेंडर फोर्जिंग के लिए, फोर्जिंग के बाद एयर कूलिंग को अपनाया जाता है। फोर्जिंग के बाद जटिल संरचना, पिट कूलिंग या फर्नेस कूलिंग के साथ मध्यम और उच्च मिश्र धातु इस्पात की फोर्जिंग को अपनाया जाना चाहिए।
Sometimes, during the forging process, the intermediate billet or forging is locally cooled to room temperature, which is called intermediate cooling. For example, in order to perform flaw detection or clean up defects on the blank, intermediate cooling is required. Another example is multi-fire forging, first forging the middle part and then both ends. After the middle part is forged, it should be cooled in the middle, so as not to affect the quality when reheating the two ends. The determination of the intercooling specification is the same as the cooling specification after forging.
कृपया हमसे zhang@pride-cnc.com . पर संपर्क करें
